Changing the belt on your Bissell vacuum cleaner is an essential maintenance task that helps keep your vacuum operating efficiently.
Over time, the belt can wear out, stretch, or break, reducing the vacuum’s ability to clean effectively.
Here’s a step-by-step guide to changing the belt on your Bissell vacuum cleaner.
Tools and Materials Needed
- Replacement belt (compatible with your Bissell vacuum model)
- Screwdriver (typically a Phillips-head)
- Scissors (optional, for cutting the old belt if necessary)
- User manual (for specific instructions and belt type)
Steps to Change the Belt
1. Turn Off and Unplug the Vacuum
- Safety First: Ensure the vacuum cleaner is turned off and unplugged from the power outlet to prevent any accidental injuries.
2. Access the Brush Roll Area
- Lay the Vacuum Down: Place the vacuum cleaner on its back so you can easily access the brush roll area.
- Remove the Bottom Cover: Depending on your Bissell model, you may need to remove screws or clips holding the bottom cover in place. Use the screwdriver to remove these and set them aside.
3. Remove the Brush Roll
- Lift the Brush Roll: Carefully lift the brush roll out of its housing. Be mindful of any side caps or bearings that might come off with it.
- Detach the Old Belt: If the old belt is still intact, slide it off the motor shaft and the brush roll. If it’s broken, remove any remaining pieces.
4. Install the New Belt
- Position the New Belt: Place the new belt around the motor shaft first.
- Attach to Brush Roll: Loop the other end of the belt around the brush roll. Ensure the belt is properly aligned in the belt groove on the brush roll.
5. Reinstall the Brush Roll
- Align and Insert: Position the brush roll back into its housing, making sure the belt is aligned and the brush roll is seated correctly.
- Check Tension: Ensure the belt has a firm tension but is not overly tight. It should allow the brush roll to spin freely.
6. Reattach the Bottom Cover
- Secure the Cover: Place the bottom cover back over the brush roll area and secure it with screws or clips.
- Tighten Screws: Use the screwdriver to tighten the screws securely, ensuring the cover is firmly in place.
7. Test the Vacuum
- Plug In and Turn On: Plug the vacuum back into the power outlet and turn it on.
- Check Operation: Test the vacuum to ensure the brush roll spins correctly and the vacuum operates smoothly.
Tips and Precautions
- Use the Correct Belt: Always use a replacement belt specified for your Bissell model to ensure proper fit and function.
- Regular Maintenance: Check the belt regularly for signs of wear and replace it as needed to maintain optimal performance.
- Clean the Brush Roll: While you have the brush roll out, take the opportunity to clean it thoroughly, removing any hair, threads, or debris wrapped around it.
Conclusion
Changing the belt on your Bissell vacuum cleaner is a straightforward process that can significantly improve your vacuum’s performance.
By following these steps and ensuring you use the correct replacement belt, you can keep your vacuum operating efficiently and extend its lifespan.
Regular maintenance, including belt checks and replacements, is key to keeping your home clean and your vacuum in top condition.